Winterizing Outboard Motor 4 Stroke. 5 steps to winterize an outboard motor. Remove the overflow screw and put a container under the drain screw to catch the old oil.
Annual Maintenance And Winterization - Mercury 115Hp 4-Stroke Outboard Engine | - Youtube from www.youtube.com
Add a fuel stabilizer to the engine so as it can. 3 hours per engine tools and supplies engine oil (4.8 quarts needed for a yamaha f150) oil filter (yamaha part no. This will help get rid of any sediment collecting within the system.
Plug In The Earmuffs And Start The Engine.
2 quarts of evinrude/johnson storage fogging oil. Boats.com senior editor, lenny rudow, will walk you through the steps on how to winterize a four stroke outboard motor. The storage mixture should consist of:
This Episode Was Featured On Powerboat Television.to Watch Full Episodes Online, Go To Www.powerboattv.com
Outboard winterization is a boat motor maintenance. 5 steps to winterize an outboard motor. Ideally, this is done while the engine is still warm and involves spraying fogging oil.
Remove The Drain Screw And Washer, And Let The Oil Fully Drain.
Treatment of the fuel mixture. Fog the engine treating the engine with fogging oil helps prevent engine corrosion. Finally, replace the fuel filter.
Connect Earmuffs And Warm Up The Engine.
Yes, it’s a must to winterize a 4 stroke yamaha outboard motor to make it safe during the spring season and keep it in peak performance. 15,675 in this video, mercury marine will cover the process steps to winterize the mercury 4 stroke outboard engine. Treat the fuel with a fuel stabilizer.
Four Stroke Outboard Motors Are By Far The Most.
This will help get rid of any sediment collecting within the system. Add a fuel stabilizer to the engine so as it can. 3 hours per engine tools and supplies engine oil (4.8 quarts needed for a yamaha f150) oil filter (yamaha part no.
